SomeBackup – Technology Blog

In both science and in technology, a battery is used as a type of device that is used to store energy, making it available for use in an electrical form. They consist of electrochemical devices, including one or even more galvanic cells.

Baghdad Batteries are thought to be the first known in history, dating back from sometime between the years of 250 BCE and 640 BCE. The modern battery began with the Voltaic pile, which was developed by Alessandro Volta, an Italian physicist, in 1800. As of a 2005 estimate, the battery industry generates, no pun intended, around 48 billion dollars in annual sales.

Batteries can be divided into two main categories, rechargeable batteries and non-rechargeable, or disposable, batteries.

Disposable batteries are also known as primary cells. They are intended for a one time use only, to be used until the chemical changes used to induce its electrical current supply have been finished. Their common usages include smaller, more portable devices that have either a low current drain or are used away from any alternative power source.

Rechargeable batteries, also known as secondary cells, have a longer usage life since they can be recharged after their power has been drained. You can do so by applying an externally supplied electrical current. This causes a reversal in the chemical changes that occur during the battery’s use. These devices used to do this are commonly known as rechargers or chargers.

The ‘wet cell,’ or lead-acid, battery is the oldest form of the rechargeable battery that is still in today’s use. This battery contains a liquid found in an unsealed container that requires the battery to be kept in an upright position. The area in which it is used must be well-ventilated so as not to cause the ventilated, hydrogen gas to display its explosive qualities.

The lead-acid battery is quite heavy, although its cost to manufacture is low and the high surge content levels allow it to be a commonly used battery in places where its weight and handling ease are not of any concern.

The most common form of a lead-acid battery is the car battery.

A gel battery is known to be an expensive lead-acid battery type, containing a semi-solid electrolyte that is used to prevent spillage.

The portable types are considered to be ‘dry cells.’ They are sealed units that are useful in appliances such as cell phones and laptop computers. These types of cells also include, nickel-cadmium or NiCd, nickel metal hydride or NiMH, and lithium-ion or Li-Ion, listed in the order of their increasing power density and also their cost.

Both disposable batteries and rechargeable batteries come in various standard sizes. This is so they can easily be used in a wider amount of appliances. The most commonly known types of batteries are the A-series, including A, AA, AAA, and AAAA. Also known are B, C, D, F, G, J, and N. Other variants include 3R12, 4R25, PP3, PP9, and the 996 and PC926 that are used in lanterns. There are many, many more less common battery types, and their usages vary greatly.

Having a baby can be a nerve wracking experience for new parents – not the nine months of pregnancy, I’m talking about after the infant is brought home from the hospital. It’s always the same thing, by the time they have their third child they have it all figured out, but with number one it’s a learning thing.

Baby monitors help you hear your baby’s needs without you having to be in the room with the baby. Some baby monitors are portable, or “mobile” and are small enough that you can carry it in your pocket as you do your daily chores around the house. Depending on your price range it’s best to have a base unit that plugs into the wall. The receiving unit can be like your portable phone, you can carry it around with you, and plug it back into the base unit to be recharged.

Some people find that their baby monitor can be interrupted by cell phones, mobile phones, computer networks and even your neighbors baby monitors. Be aware of any potential interruptions before you put the monitor into official use. Also, make sure you get a monitor with a receiving unit that emits a tone when the battery is going low so you won’t be caught with a dead battery.

Another consideration before purchasing a baby monitor is the range the monitors have. If you have a more regular sized home say 1,800 you probably won’t have any problem with a conventional baby monitor. If you live in a home that has square footage of 4,000 or more, or if you live in a multi level home you may need a specific type of unit.

There are baby monitors available that actually feature what is called a “sensor pad”. The pad is placed underneath the crib sheet and picks up any movement the baby may make. Some physicians recommend these types of monitors for premature babies.

FILE FORMATS There are several audio file formats in common use. There are fewer video file formats, but audio video file extensions can be confusing. This is just a brief description of what the more commonly used audio and video file formats and systems are.

AAC:Advanced Audio Coding This is the audio file format used by Apple for the iTunes Music Store, and it may appear with the M4A filename extension. It is better than MP3 for sound quality. It was developed as part of the MPEG4 group owned by Dolby (see below).

AU: This audio file format is the standard used by Java, Sun and Unix.

MPEG: Moving Pictures Expert Group There are a number of MPEG types now, described below.

MPEG-1: This is used in digital cameras and camcorders for small video clips. VHS quality playback can be expected from MPEG-1.

MPEG-2: Used for digital satellite TV, professional movie recording and recording of home DVD recordings. Provides provision for multi-channel surround sound recordings.

MPEG-3: MPEG-3 was propose as an entity, but eventually merged into MPEG-2.

MPEG-4: This is the newest MPEG system and is used for streaming internet content. It is also used in portable video recorders and for internet downloads. Required for DivX. It improves digital broadcasting and interactive graphics and multimedia.

MP3: Digital audio files, most commonly used to store and playback music. It compresses the files to about 10% of a normal audio file, and a normal music track will be about 5 -6 MB in size. MP3 stands for MPEG-1 Audio Layer 3, not MPEG-3 as many people think. A typical MP3 audio file is near CD quality.

OGG: An audio file format supporting a variety of codecs, the most popular of which is the audio codec Vorbis. However, MP3 files are much more broadly supported than Vorbis.

RA: Real Audio This format is designed for streaming audio over the Internet. It is a self-contained file format with all the audio information stored within the file itself.

WAV: The simplest of the audio file formats, developed by Microsoft and IBM, and built into Windows 95. It is an uncompressed audio file format with large file sizes (10 x MP3), and does not need further processing to play. The WAV file consists of three blocks of information: The RIFF block which identifies the file as a WAV file, The FORMAT block which identifies parameters such as sample rate and the DATA block which contains the actual data, or music sample.

WMA: Windows Media Audio A digital system invented by Microsoft, and is used in portable digital audio players. Using WMA, a file can be programmed so that it cannot be copied, and can be used to protect copyright.

WMF: Windows Media Format These are audio-video files comprising WMA and video codecs. They provide high quality and media security for streaming and download and play applications on computers.

WMV: Windows Media Video Used in the Windows media Player, this is used to stream and download and play audio and video content.

When dealing with audio and video file formats, you will sometimes notice the term ‘codec’. A codec is simply short for encoder-decoder (or compressor – decompressor). A main function of a codec is to compress audio or video data streams so that transmission of digital audio samples and video frames can be speeded up and storage space reduced.

The objective of all codecs is to reduce the file size to a minimum while maintaining audio and video quality. A quick indication of the codec’s place in the path of transmission and reception is:

Video device (e.g. camcorder) – video capture card – video digitized – codec (compresses digital info) – result (MPEG2, AVI, WMV etc) – codec (decompress) – video frames – display device.

Between the two codecs the compressed result is transferred to the display device transmitted, stored on file, etc). So to condense the flow even further, we could basically describe it as:

raw data – codec – transmit – codec – play

This is simplistic, but it shows where the codecs are used. Therefore, in order to play a movie, video or piece of music of a certain format, you need a codec in your computer to allow you to decompress the file and play it.

We don’t use E-gold very often since most of our online business and customer sales are conducted through our online merchant account. However, we occasionally have someone who will request paying by E-gold so we keep an account there for this reason. Once a month or so we withdraw the funds and decided to do so yesterday. Imagine our dismay when we logged into our E-gold account yesterday and found our balance to be a big fat ZERO! We had checked the balance just a few days ago so we knew this was not correct. After investigating the history of the account, we found that a spend had been made to another e-gold account user WITHOUT our knowledge or authorization. We had been hacked!

Since we have up to date anti-virus and firewall software on our computer, we assumed we were safe. Not so! It seems this is not enough to keep away the hackers as the software does not prevent “Spyware” from being installed on your computer.

“Spyware” is software that gets onto your computer and literally “spies” on your activities. The spying can range from relatively harmless use of cookies tracking you across multiple websites… to extremely dangerous “keystroke loggers” which record passwords, credit cards, and other personal data. That data then gets relayed to the person who put the software on your computer.

Spyware gets on your computer in one of several different ways.

First, it rides along with software you download from the ‘Net and install on your system.

Second, they come as email attachments (much like viruses) and automatically install themselves on your computer when you open the email message.

Third, hackers find an open port on your computer and use the “back door” to install basically anything they want.

And fourth, the more malicious types, like keystroke loggers, can even get installed by someone with direct physical access to your computer such as an employer, suspicious spouse, business competitor, or someone who wants to know exactly what you’re doing.

So how do you protect yourself against these malicious hackers? You need a program that specifically scans your system for the tens-of-thousands of existing spyware programs along with the new ones appearing daily.

You may have spyware lurking on your computer right now so protect yourself today by downloading one of the above programs!

As a point of reference, we contacted E-gold and informed them that we had been hacked. We provided them with the account number of the person who received the funds and asked for a contact e-mail address on the person. E-gold informed us that they could not provide that information without a “court order” and that basically there was no way of getting the money back!

Take action today to protect yourself from this growing threat! The bottom line is: – Keep your anti-virus program current

- Install a firewall
- Carefully screen software before installing it
- Scan specifically for spyware weekly
- Stay current on this growing threat.